在马斯特里赫特A2高速公路隧道和新绿地De Groene Loper的建设完成后，Vrijheidspark在Koningsplein附近的区域进行了布局。公园的地面规划包含了许多椭圆形的绿地，其中一个石凳突出了一个亭子的指定位置。
After the tunneling of the A2 motorway in Maastricht and the construction of the new greenbelt De Groene Loper had been completed, the Vrijheidspark was laid out in the area near Koningsplein. The ground plan of the park incorporates a number of oval green spaces, one of them accentuated by a stone bench that marks the designated location of a pavilion.
多面亭由一个圆形混凝土平台、一个长方形的建筑体量和一个圆形的钢制顶棚组成。旋转木马状的建筑设置在椭圆形的中间，一侧是儿童游戏区，有隐蔽的喷泉，另一侧是露台的桌椅。砖砌外墙的水泥长椅是训练营或跑步训练的起点。从露台上的圆形孔洞中，树木经过树冠的钢梁向上生长。在内部，天幕的钢结构延续了木质层叠梁的结构，建筑中间有一根混凝土柱。餐厅和厨房形成了一个T形空间，大面积的玻璃幕墙。
The multi-sided pavilion consists of a round concrete terrace, a rectangular building volume, and a round, steel canopy. The carousel-like building is set in the middle of the oval with on one side a play area for children with hidden fountains and on the other the tables and chairs for the terrace. The concrete benches in the brick façade are the starting point of a boot camp or running training. From circular apertures in the terrace, trees grow upwards past the steel beams of the canopy. Inside, the steel construction of the canopy continues as the construction of wooden, laminated beams with a concrete column in the middle of the building. The restaurant and kitchen form a T-shaped space with large glass façades.
圆形的钢制天棚和树木可以用灯光、装饰品和攀援植物来装饰。圆形混凝土平台位于一个米黄色的半铺装区域，形成了亭子和天然石材椭圆形之间的过渡。亭子的整个屋顶都有太阳能电池板，EPC为0，没有连接到燃气管道。热泵的室外机组与建筑体量融为一体，与其他大部分所需的进风口和出风口一起位于外立面的木格栅后。砖砌外墙是用制造商Janinhoff剩余的一批赤陶模块砖制成的。没有合适的砖块或基石。因此，一些砖块被垂直或水平地锯开，以达到所需的图案、立面的尺寸以及长椅和窗户的位置。
The circular steel canopy and the trees can be decorated with lights, ornaments, and climbing plants. The round concrete terrace lies in a beige-coloured semi-paved area and forms the transition between the pavilion and the natural stone oval. The pavilion has solar panels over the entire roof, an EPC of 0, and is not connected to the gas mains. The outdoor unit of the heat pump is integrated with the building volume and located behind a wooden grille in the façade, along with most of the other required air inlets and outlets. The brickwork façade is made with a leftover batch of terracotta module bricks from manufacturer Janinhoff. There were no fitting pieces or cornerstones available. Some of the blocks were therefore sawn, vertically or horizontally, to achieve the desired pattern, the dimensions of the façade and the position of the bench and window.
建筑师：KettingHuls
面积：156平方米
年份：2020年
照片：Stijn Bollaert
设计团队：Daniëlle Huls, iNeXarchitecten
承包商：Eijkerbouw
砖头：Steenhandel Gelsing
城市：Maastricht
国家：荷兰
Architects: KettingHuls
Area: 156 sq.m.
Year: 2020
Photographs: Stijn Bollaert
Design Team: Daniëlle Huls, iNeXarchitecten
Contractor: Eijkerbouw
Bricks: Steenhandel Gelsing
City: Maastricht
Country: The Netherlands